1022 Results: New & Used in Tools & DIY in Australian Capital Territory

Brand new, never used. Came as part of a kit and I already have a pair. Included is the charger.

Approx 1100 x 400 x 400mm Black Powdercoat Toolbox with Lid Chain Support, Heavy Duty Handles and Croc-Loc Locking System. Sits on felt pads so bottom is not scratched. Cash on pickup only. If you are reading this, it is still available. If you ask if it is still available, I will reply with a funny retort.

I'm selling my Festool Kapex 260mm Slide Compound Mitre Saw. It is about 8 years old, but as I am a home hobby woodworker, it has hardly been used, and is in excellent condition. It works perfectly and cuts beautifully! It comes with 260mm blade, workpiece clamp and rear support rails. Please note - local pick up only! I am not prepared to ship this saw.

Used Gorilla cart for $60: - 60 cms width, 115 cms length, 110 cms height; no side walls - High-gauge steel frame - Balanced 4-wheeled stability with 300+ kgs loading - 10'' pneumatic tyres - Easy 360º steering Pick up in Hawker ACT at any time. If you can see this add, the cart is still available.

VARIOUS TOOLS,TAPS,DIES,HANDLES;MINI SCREWDRIVERS,EZY OUTS,HELLICOIL?SET

Black and decker dovetail joint maker makes secret dovetails is in good condition comes with an original band d router but works with any router

Chicago Air HUSH50 Aluminium Silenced 50L Air Compressor almost brand new only use 3 times for small jobs

Tool for trimming lawn grass at the edge of paths - steel handles, wheel and cutting blades, and a rubber grip. Made in Australia by Daytek (factory still operating in Coburg, Victoria) and made to last... Toothed wheel give positive pressure on the grass against the cutting blades, leaving a clean lawn edge along the path or garden bed. Both for $25 or $10 for one. Pickup in Hawker ACT.

Selling my toolbox as my new job position doesn't require me to have one any more open to offers

Still starts and runs perfectly, oil still pumping well, compression is fine. Chain almost new and reasonably new air filter. Probably coming close to end of bar life so could do with a new bar. Easy start model and tool free chain adjust

"4.2m to 4.5m new trestle ladder Australian aluminium scaffold Canberra 4.2m to 4.5m trestle $536.4 ex gst / $590 inc gst (was $708) - 33 kg. *** Instant setup. Rock solid stability on uneven ground with adjustable legs Cover lots of ground by swapping in and out different length planks to fit any space big or small Pickup in Sydney Deliveries across Sydney, Wollongong, Mittagong, Central Coast, Newcastle *Due to limited stock, please call us first to check availability for pickup / delive

"2.4m to 2.7m new trestle ladder Australian aluminium scaffold Canberra 2.4m to 2.7m trestle $377.3 ex gst / $415 inc gst (was $498) - 19 kg. *** Instant setup. Rock solid stability on uneven ground with adjustable legs Cover lots of ground by swapping in and out different length planks to fit any space big or small Pickup in Sydney Deliveries across Sydney, Wollongong, Mittagong, Central Coast, Newcastle *Due to limited stock, please call us first to check availability for pickup / delive

"3.25m/3.8m/5.5m/6.0m new aluminium scaffolding mobile tower Canberra 3.25m Reach (0.34m to 1.2m Platform) Toolkits: Base. Structural size: 1.44m Lx 0.74m W x 2.8m H $763 ex gst / $839 inc gst (was $1007) - 36 kg. *** Goes anywhere, indoor + outdoors. Compact to fit through doorways. All Terrain And Stairs toolkit option for uneven ground. Pickup in Sydney Deliveries across Sydney, Wollongong, Mittagong, Central Coast, Newcastle *Due to limited stock, please call us first to check availabil

"3 metre planks new / aus aluminium scaffold 3m / canberra 3m plank $151 ex gst / $166 inc gst (was $200) - 10.9 kg. *** Freely swap in and swap out different length planks to fit any space big or small Longlife, built tough for weather resistance and anti-slip treads Pickup in Canberra Delivery available in Sydney, Canberra, and Newcastle. *Due to limited stock, please call us first to check availability for pickup / delivery. *Prices Subject to change Contact us (02) - 7251 - 2288 * Lon

• Makita

Brand new Makita Router, RP2301FC05

100mm swivel castors with brake View Melba

• Other

Blackridge direct drive air compressor BRC180. Works well.180 lpm, 40 litre tank, 2.5 HP. Comes with air hose.

• Other

Brand new unwanted gift. Retails for $599 asking for $350.

If you’re looking you should know it’s a bit of a unicorn. Used once and then back in the box. Original packaging and instructions. Price is firm, no shipping especially to the sub-continent coz I reckon that might be a bit sus. Pickup only from the deep south of Canberra and cash only. From real people… I will only respond to gummy messages due to scammers.

909 brand saw that drops down. Finished the deck building project and no longer have any use for it. Includes extendable stand.

Say good bye to backbreaking manual post boring and digging and welcome to the technological breakthrough GIANTZ Post Hole Digger. The GIANTZ Post Hole Digger is geared up to do simple post digging as well as serious deep hole boring. Its class-leading 80cc 2.6kW 2-stroke petrol engine revs up to 3200rpm to get your hole dug out with precision and ease. The advanced vertical gearbox design also allows for better efficiency and reliability. Featuring a solid 20mm auger mount, the GIANTZ Post H

Say goodbye to backbreaking manual post boring and digging and welcome to the technological breakthrough that is our Giantz 80cc Petrol Post Hole Borer/Digger (motor only). It is geared up to do simple post boring as well as serious deep hole boring. The class-leading 80cc 3kW 2-stroke petrol engine revs up to 2800rpm - 3200rpm to get your hole dug out with precision and ease. The advanced vertical gearbox design also allows for better efficiency and reliability with the motor. With regard to i

• Other

A Triton Workcentre 2000 including - Installed GMC 235mm circular saw with relatively new 40 tooth blade - Protractor - Rip fence - Saw guard - Vacuum hose and attachment - Cross cut fence Triton router table RTA200 with - Workzone 1/4 inch plunge router - Craftright router bit set - Router fence - Router mounting plate All parts are in good condition. One of the legs needs tightening with a spanner as the spring clip got out of alignment. (See picture 4) Surplus to my needs Cash only. No

Selling a little used Bayer BEF22 triple outlet dust extractor. These are the original bags it was bought with. Tested and in perfect working order. Just need to make some room.