39 Results: New & Used in Other Parts & Accessories in Australia

Up for sale here I have a 1960 Ford F Truck Pickup, Factory original Australian Delivered RHD cab and chassis complete with original ID tags and Numbers. Original 1957 guards and bonnet fitted, Jag power assisted rack and pinion front end Disc brake front end fitted with a new 9 diff. Professionally tubbed and 15x10 steelies fitted with new mickey thompson tyres on the rear and steelies with new 15x5 on front. All set up for a ford V8 engine and C10 and new Tailshaft. Original Steel Tailgate fi

If you’re looking for a robust bull bar that represents excellent value, then a TJM Tradesman bull bar is a top choice for your Toyota Landcruiser 70 Series 03/2007 V8 with flares (not single cab 10/2016 ) This TJM Tradesman bull bar is 4×4 equipped with a steel winch-mount, recessed fog lights, combination lights, and reinforced T-slot recovery jack points. It’s ready to work for you with dual aerial mounts and mounting points for installing large driving lights. A stylish 76mm centre tube and

The Torsion Bar Linkage Partnumber A1693230965 for a Mercedes B200 is brand new, it was ordered and not needed. Shipping cost a born buy buyer. Location Postcode 2800

As new canvas and galvanised frame for a 130 dual cab ute in Sand colour. Was only installed for 4 weeks. Vehicle has now been sold. Tilt and frame from Exmoor Trim and comes with all fitting parts, bolts, screws and instructions plus the storm gutters panel and bag. Shipping upto the buyer to organise.

Aluminium UTE Canopy 3 Door Checker Plate 1800x1780x860mm NEW IN STOCK NOW!! READY TO GO!! HURRY!! 3 Door Aluminium Canopy Checker Sheet Ute Truck Canopy 1800x1780x860 CHECKER PLATE ALUMINIUM CANOPY INCLUDES LADDER RACKS X 2 DOORS: 3 DOORS - 2 SIDE DOORS, 1 REAR DOOR. SIZE : L:1800MM x W:1780MM x H:860MM LIGHT WEIGHT 2.5MM ALUMINIUM CHECKER PLATE INCLUDING ALUMINIUM TUBE STRUCTURE 6 x WHALE TAIL LOCKS SECURED; KEYED ALIKE 6 KEYS 2 x GAS STRUTS FOR EACH DOOR WEATHER PROOF

ＦＯＲ ＳＡＬＥ- 𝐎𝐔𝐑 𝐍𝐄𝐖 𝐆𝐄𝐍 𝐂𝐔𝐒𝐓𝐎𝐌 𝐁𝐔𝐈𝐋𝐓 𝐂𝐀𝐍𝐎𝐏𝐘 Features: Australian Made Fitted directly to chassis (no tray required) 3mm flat sheet aluminium construction 5mm flat sheet aluminium front wall Flared Mudguards Enclosed taillights Infill skirts front & rear of rear wheel Custom double tapered underbody toolboxes 900 long mitred to shape of enclosed taillights Flush bottom door opening (no lip to allow fridge slides to fit without packing) 1800x170 Rolloc trundle drawer 𝖳�

Prorack Roof Rack to suit 2010 Nissan X-Trail or a similar S.U.V with raised roof rack support. A Fittng Kit and directions are included

Anyone in the market for an entire custom interior? Well built by a professional motor trimmer. Need it gone For Sale Custom Interior for Holden VT - VZ Wagon models. This interior was built/fabricated to go into a VY SS Wagon but plans changed, car is now sold. Interior Components Include: -Custom boot install to house 2 x 12" Subs -Custom Front & Rear Door Trims. Front doors to house 2 x 6.5" Split Speakers, Rear doors to house 1 x 6.5" Split Speakers -Custom false floors front & rear -Alre

Genuine TUFF bar for hilux******2015. In good condition.

Selling Hyundai engine, year model 2019. It has done 27,000km on it

12 months old in as new condition. Ford ranger hard top/lid central locking with light. Aluminium metallic silver New $2,800 selling for $1200 ONO

As new canvas and galvanised frame for a 130 dual cab ute in Sand colour. Was only installed for 4 weeks. Vehicle has now been sold. Tilt and frame from Exmoor Trim and comes with all fitting parts, bolts, screws and instructions plus the storm gutters panel and bag. Shipping upto the buyer to organise.

Aluminium UTE Canopy 3 Door Checker Plate 1800x1780x860mm NEW IN STOCK NOW!! READY TO GO!! HURRY!! 3 Door Aluminium Canopy Checker Sheet Ute Truck Canopy 1800x1780x860 CHECKER PLATE ALUMINIUM CANOPY INCLUDES LADDER RACKS X 2 DOORS: 3 DOORS - 2 SIDE DOORS, 1 REAR DOOR. SIZE : L:1800MM x W:1780MM x H:860MM LIGHT WEIGHT 2.5MM ALUMINIUM CHECKER PLATE INCLUDING ALUMINIUM TUBE STRUCTURE 6 x WHALE TAIL LOCKS SECURED; KEYED ALIKE 6 KEYS 2 x GAS STRUTS FOR EACH DOOR WEATHER PROOF

Up for sale here I have a 1960 Ford F Truck Pickup, Factory original Australian Delivered RHD cab and chassis complete with original ID tags and Numbers. Original 1957 guards and bonnet fitted, Jag power assisted rack and pinion front end Disc brake front end fitted with a new 9 diff. Professionally tubbed and 15x10 steelies fitted with new mickey thompson tyres on the rear and steelies with new 15x5 on front. All set up for a ford V8 engine and C10 and new Tailshaft. Original Steel Tailgate fi

I bought these MGP Caliper Covers direct from USA, as a gift for my husband’s (Orange Fury) Mustang. On the website, they appeared to be a orange/mustard colour. When they arrived they are lemon in colour. I had them fitted and from the photos you will see they don’t match his car at all. Installing these Caliper Covers will not void your manufacturer’s factory warranty. MGP advertise that these Caliper Covers are made with Aerospace Grade Alumium (not with a plastic material). These Caliper Co

The Torsion Bar Linkage Partnumber A1693230965 for a Mercedes B200 is brand new, it was ordered and not needed. Shipping cost a born buy buyer. Location Postcode 2800

Jeep - Rhinorack Overlanding Kit (Pioneer Platform) Bought less than 10 months ago, in great condition / hardly used due to height limit to my garage. This pioneer platform kit very easy to install and compatible with Jeep Wranger JK, JL and Gladiator. Introducing the Jeep Overland Kit (ROLJ1), a lightweight yet durable roof rack system for your off-road rig. Featuring a refined Pioneer™ LT tray that minimises added vehicle height and system weight whilst still maintaining durability for you

FlexiTrayTop canopy to suit Isuzu D-Max Ute. - Fibreglass construction. - Tinted safety glass windows. - Interior wired brake/open door light. - Compatible with Flexiracks. Originally fitted to my 2017 D-Max, this canopy has been dismounted and is ready go. This canopy is in near perfect condition and is originally sold new by Flexiglass at $4500.

Online now - ends 7pm Mon 8th April - register and bid today One universal investment rule stands true for all plate types- the lower the numeral or fewer the characters the more valuable the plate. With the series of 10 x "**-JDM" J-Plates recently selling for an average price of $5,417 each and with "7-JDM" selling for a high of $9,177 fees we believe the limited, low, un-replicable & distinctive series of one-off 2-character plates on auction '4J', '5J', '7J' and '7N' represent a far superi

Thule pod: - Polar 200 roof pod - 450L / 75kg capacity - lockable with keys spare key - waterproof 4WD equipment: - Recovery boards - First aid kit (unused) - Hercules recovery gear (unused) - 2x battery lead cables - 240v / 12v battery charger - tyre let-down tool and electronic pressure gauge - compact shovel (unused) Being sold due to vehicle being traded-in.

All original 1940 Australia Coupe Ute. Second owner. Complete car including buckboards (no wood). Flat head V8, 85hp, hydraulic brakes, all glass, 5 original chrome hub caps, original seat, have some manuals. 95% of rust done, had motor running and has been wrapped and stored since then. Know the history of the vehicle from purchase. We purchased in 2011 and have 2 other project's to complete and house to build before we die so no time to complete. Phone Mark only or text no emails will be resp