1893 Results: New & Used in Construction Equipment in Australia (Page 50 of 50)

• 2934 hr

2015 Takeuchi Tb215r mini excavator 1.5 ton retractable tracks from 1280 to 980 removable rops and canopy for limited access sites, two speed tracking, new boom pin and bushes, just had full service and fresh paint. Tracks good not that old, comes with half hitch 1m mud bucket and 450mm trenching bucket , good tidy reliable little machine, no oil leaks.ready to go straight to work. Won’t disappoint can come with trailer for extra cost

CALLS ONLY No texts or emails responded to: Backhoe/excavator bucket Good solid bucket 550mm wide 255mm between ears on front 135mm between ears on back Various pin locations Not sure what machine this bucket suits Please call for more details

Bobcat Skid Steer Excavator back hoe attachment with 300mm & 450mm buckets. This attachment works well and is an attachment to your skid steer in place of your 4in1 Bucket. I have had it in storage with tarp over it for 3 years in my container. This suits brand Bobcat (American), but not Thomas (Canadian) brand of Skid steer, for the attachment plate needs to be roughly 1200-1250mm wide. My Thomas skid steer attachment plate is to big for it (1300mm) so was unable to use it but did test it, I w

• 5470 hr

Purchased this machine off caterpillar, has been cat serviced and have full service history. New turbo at 5000 hours, good honest machine that works all day everyday. Comes with 1500 mud and 450, 600, 900 digging buckets.. Also have auger drive to suit machine, it has been used twice and is in as new condition. Motivated to sell, $60,000 ono

• 2316 hr

2012 Caterpillar 301.4C Excavator One owner 2,361hrs. ROPS canopy Expanding rubber tracks. Backfill blade & offset boom Dual flow piping & 3 x buckets Located Global Storage. Penrith NSW

2000mm wide Hyd tilting batter bucket, 90mm Pin, 565mm (CP to CP), 415mm (IBE), Struck capacity 1.3m3, BOCE 2060x250x25mm 13 x Holes @ 19(3/4),152(6") spacing Price From: $13,500 ex GST ,from $14,850 inc GST -----------more sizes avaliable----------------- Head over to our web page to view many more machinery attachments: http://www.aubuckets.com.au key words tilt, tilting, batter, mud, hyd, hydraulic.

AU 2200mm wide rock/skeleton bucket with teeth and side shrouds, 150mm x 150mm gaps, suit excavator with 100mm pins, 485mm ibe and 540mm cp to cp. Price from $14,500 GST = $15,950 ----------- more sizes available ----------------- Head over to our web page to view many more machinery attachments: http://www.aubuckets.com.au key words skeleton, rock, rake

350mm wide trench bucket with teeth and side cutters (410mm wide at side cutters), 50mm pins, 210mm ibe and 310mm cp to cp. Price from: $3,250 GST = $3,575 -----------more sizes avaliable----------------- Head over to our web page to view many more machinery attachments: www.aubuckets.com.au

AU 900mm wide GP bucket with teeth, 65mm pins, 280mm ibe and 410mm cp to cp. Reference Number: AU2265BGP900-2 Make: AU Serial #: 19-124 Price: $4,500 GST = $4,950 Head over to our website to view our large range of machinery attachments: www.aubuckets.com.au

JCB 3CX 150 Deep trenching bucket Wanted

• 554 hr

Avant skid steer ,very low hours ( 554 ) . Used indoors for most of it`s life , loading 2 buckets per day in a concrete mixer . Excellent condition and comes with spare tyres and light weight loading ramps . More info phone Phil on .

AU 450mm wide compaction wheel, 65mm pins, 280mm ibe and 410mm cp to cp. 600mm diameter wheel. Reference Number: AU65COMPWHEEL Make: AU Serial #: 19-120 Price: $6,000 GST = $6,600 Head over to our website for more machinery attachments: www.aubuckets.com.au

Hydraulic Tree shear to suit excavator, 65mm pins, 250mm ibe and 400mm cp to cp. Reference Number: SB221010 Make: OSA Demolition Equipment Serial #: 9109310 Price: $150 GST = $165 per day For many more machinery attachments, please head over to our website: www.auhire.com.au

CAT DEO-ULS 515-3968 15W40 DIESEL ENGINE OIL 20L Unopened

580mm wide auger attachment, 1600mm total length, 75mm x 75mm connection end. Reference Number: SG221101 Make: UNBRANDED Serial #: SG221101 Price: $100 GST = $110 per day For many more machinery attachments, please head over to our website: www.auhire.com.au

750mm wide auger attachment, 1600mm total length, 75mm x 75mm connection end. Reference Number: SG230130GS Make: DIGGA Serial #: SG230130GS Price: $100 GST = $110 per day Head over to www.auhire.com.au for many more machinery attachments

Reference Number: Blade Dun Make: CAT Serial #: 7GW0062 Price: $27,500 inc GST D9R Dozer blade CWTS-A/AP 7GW00622 , 5940mm wide , 4.4 ton , located in Wangaratta VIC Australia , call Gary for more details , unit removed from dozer to fit cable reel , Dozer not available More information located here: https://www.allused.com.au/product/cat/d9r/11184/

• 6198 hr

D3G bulldozer for sale Major service at 6000hrs New seals in both blade rams New track idlers 100hrs on cutting edge Machine currently still working Located Nambucca heads and can deliver at extra cost. Call Dylan if interested

• 5 hr

2022 Digga Cleana Broom attachment. Excellent condition <5hrs use. 1800mm wide (model BR-000416). Selling as no longer have a use for it, near new.

• 0 hr

SVL97-2CHF HIGH FLOW TRACK LOADER 2023 INCLUDES 80"HEAVY DUTY HIMAC BUCKET CANVAS SEAT COVER, BEACON & FIRE EXTINGUISHER ONE ONLY LEFT AT THIS PRICE!!!

Salmon 600mm backhoe bucket with teeth 50mm top pin x 260mm wide 45mm bottom pin x 210mm wide 370mm pin centres

John Deere skidder spares Suit E, G, G3 machines Diff parts Engine parts etc Phone calls only and please leave a message No text or emails

This is a 20 foot high cube,it has a floor fitted halfway, easily removed, it's had central Ty bar welds redone a few rust spots and dents, licenced to ship

1.7 tonne excavator and trailer for sale , digger has just been serviced and have never had any issues with it , hours are on the photos , trailer is solid but electric brakes do not work.